Access Point BeaconHD


802.11ac Wave 2 access point that plugs into an AC wall outlet to quickly extend wireless coverage and improve throughput.
The Access Point BeaconHD (UAP BeaconHD) is a 802.11ac WiFi access point that utilizes Wave 2 technology and bidirectional uplink design to connect with and relay the signals of other nearby UniFi access points to extend and enhance wireless coverage throughout your home or office. The compact UAP BeaconHD plugs into any AC wall outlet and offers a 1.733 Gbps throughput rate over its 5 GHz (4×4 MU-MIMO) band while also improving the radio rates of nearby WiFi devices. The UAP BeaconHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.


  • 802.11ac Wave 2 WiFi technology
  • Establishes bidirectional uplinks to nearby UniFi access points
  • 5 GHz (802.11ac, 4×4 MU-MIMO) band with a 1.733 Gbps throughput rate
  • Improves the radio rate of nearby WiFi devices

Note: The UAP BeaconHD plugs into an AC wall outlet.

Managed with the UniFi Network application: Version 5.11.11 and later

SKU: UAP-BeaconHD-US Category:


The Fastest Way to Extend Wi-Fi Coverage and Increase Throughput
High-Capacity Mesh Uplink
Bi-directional uplink to nearby UniFi AP
802.11ac 4×4 MU-MIMO
5 GHz radio rate of up to 1.733 Gbps
Enhance Signal Levels
Improves radio data rates for nearby Wi-Fi devices

Easy to Set Up

Once it’s plugged in, the UAP BeaconHD can be adopted and managed with your UniFi Network application.

Experience the Scalable
UniFi Network Application

The UniFi® Software-Defined Networking (SDN) platform is an end-to-end system of network devices across different locations — all controlled from a single interface.

Download Mobile App

Seamless Network Integration

The UniFi AP Beacon HD is a meshpoint designed for use with any UniFi AP supporting mesh uplinks, including the UDM.
Product Summary
Dimensions 169.7 x 112.15 x 32.2 mm (6.68 x 4.42 x 1.27″)
Weight 260 g (9.17 oz)
Networking Interface WiFi
Button Reset
LED System/Status
Processor 880 MHz MIPS 1004KEc
System Memory 128 MB SDRAM
Maximum Power Consumption 11.5W
Supported Voltage Range 100 – 240VAC, 0.3A Max., 50/60 Hz
Power Method AC
Max. TX Power*
2.4 GHz
5 GHz
24.8 dBm
30 dBm
*Including antenna gain. Maximum TX power level may be limited by user’s country-specific regulations.
Antenna Gain
2.4 GHz
5 GHz
4.5 dBi
5 dBi
Operating Temperature -10 to 60° C (14 to 140° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
WiFi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
BSSID Up to 8 per Radio
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
Power Save Supported
Beamforming Supported
WMM Voice, Video, Best Effort, and Background
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
802.11ac Wave 2 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
58 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2, VHT 160)
Instructions and Manuals

1 review for Access Point BeaconHD

5 Star

0 %
0 review(s)

4 Star

0 %
0 review(s)

3 Star

0 %
0 review(s)

2 Star

0 %
0 review(s)

1 Star

0 %
0 review(s)

Reviewed by 01 customer(s)

  • Avatar

    saepe facere quia facere officiis cumque magnam veniam exercitationem est est qui rerum doloremque. est architecto quis corporis non et architecto explicabo vel accusamus expedita aperiam et sapiente

    May 12, 2024

Leave feedback about this

Your email address will not be published.